© 2004 - 2010 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO200L/202L/203L/230/230L/232/233/280/282/283
FIRMWARE UPDATING
6 - 51
6
<Updating Engine ROM>
(1) Install the ROM to the download jig.
Make sure the direction is correct (P.6-33 "Fig. 6-35").
(2) Turn OFF the power of the equipment.
(3) Take off the connector cover.
Fig. 6-52
(4) Remove the cover plate.
Fig. 6-53
Connector cover
Cover plate
05/11
To Next Page
Loading...
