© 2004 - 2010 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO200L/202L/203L/230/230L/232/233/280/282/283
FIRMWARE UPDATING
6 - 81
6
[C] Display during the update
The processing status is displayed as follows on the LCD screen during the update. (As an example,
the display for updating the system ROM is explained below.)
When the device is recognized properly after 3
minutes, the screen for selecting items is dis-
played.
Press the [START] button after selecting the
item to be updated. The device check starts.
To Next Page
Loading...
