e-STUDIO200L/202L/203L/230/230L/232/233/280/282/283 © 2004 - 2010 TOSHIBA TEC CORPORATION All rights reserved
DATA CLONING with USB STORAGE DEVICE (e-STUDIO202L/203L/232/233/282/283)
9 - 22
[C] Confirmation of the error
"Back Up ERROR X" (X: Error number) is displayed at the top of the LCD screen when the data have
not been properly backed up / restored. In this case, turn the power OFF and then check the following
items. After confirming and solving the problem, back up / restore the data again from the beginning.
• Does the USB storage device meet the conditions being used for this cloning?
• Is the updated program file written on the USB storage device properly?
• Is the USB storage device installed properly?
• Is the USB storage device or the equipment damaged?
Fig. 9-35
Error number Error content
ERROR 1 Copy error
ERROR 2 I/F error
ERROR 3 USB memory full error
ERROR 4 Working folder error
ERROR 5 File not found error
ERROR 6 Security error
ERROR 7 Checksum error
ERROR 8 Model check error
ERROR 9 Version check error
ERROR 10 Destination check error
ERROR 11 Serial number check error
To Next Page
Loading...
