Toshiba e-studio2307 - Top Cover

4
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A
DISASSEMBLY AND REPLACEMENT
4 - 9
4.1.14 Top cover
(1) Take off the platen cover or RADF.
(2) Open the right cover.
(3) Take off the control panel unit.
 P. 4-10 "4.2.1 Control panel unit"
(4) Remove 7 screws and take off the top cover
[1].
Remarks:
The top cover is pasted with the original
glass.
Fig. 4-23
[1]