Toshiba e-studio2307 - ADU Sensor (S8)

e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A © 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND REPLACEMENT
4 - 124
4.11.2 ADU sensor (S8)
4.11.3 Fuser guide unit
(1) Remove the ADU.
 P. 4-123 "4.11.1 Automatic duplexing unit
(ADU)"
(2) Unplug 1 connector and release 3 latches
and remove the ADU sensor [1].
Fig. 4-330
(1) Remove 1 screw and remove the "fuser
guide unit" [1] that is attached to the fuser.
Fig. 4-331
[1]
[1]