Toshiba e-studio2307 - Separation Needle

e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A © 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND REPLACEMENT
4 - 56
4.7.13 Separation needle
4.7.14 Ozone filter
(1) Open the right cover.
(2) Take off the duct unit.
 P. 4-35 "4.6.3 Duct unit"
(3) Take off the registration roller (rubber).
 P. 4-45 "4.6.15 Registration roller
(rubber)"
(4) Take off the transfer roller unit [1].
Fig. 4-145
(5) Peel off the separation needle protection
sheet [2].
(6) Take off the separation needle [3].
Fig. 4-146
(1) Open the right cover.
(2) Take off the duct unit.
 P. 4-35 "4.6.3 Duct unit"
(3) Take off the ozone filter [1].
Fig. 4-147
[1]
[2]
[3]
[1]