e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND REPLACEMENT
4 - 38
(2) While pressing the stopper [2] to the rear
side, take off the bypass feed roller [3].
Fig. 4-96
Notes:
When attaching the bypass feed roller, align
the convex part on the feed roller side with
the concave part on the equipment side.
Fig. 4-97
[2]
[3]
To Next Page
Loading...
