5
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A
SELF-DIAGNOSIS MODES
5 - 19
• PM support mode
Fig.5-5
The number of pages currently output (OUTPUT PAGES/DEVELOP COUNTS), the recommended
number of output pages for PM (PM OUTPUT PAGES/DEVELOP COUNTS), the current drive count
(DRIVE COUNTS) and the recommended drive count for PM (PM DRIVE COUNTS) are output
together with PM units. Use this list for confirming the PM units to be replaced at each PM. See the
following page for PM:
Refer to P. 7-1 "7. PREVENTIVE MAINTENANCE (PM)".
PM SUPPORT CODE LIST
20xx-xx-xx xx:xx
UNI T OUTPUT PAGES PM OUTPUT PAGES DRIVE COUNTS PM DRIVE COUNTS
DEVELOP COUNTS DEVELOP COUNTS
DRUM
18 70000 11735 170000
DRUM BLADE
18 70000 11735 170000
SEPARATION FINGER(DRUM)
18 70000 11735 170000
GRID
18 70000 11735 170000
DEVELOPER
0 70000 11735 170000
OZONE FILTER
18 70000 8625 170000
FUSER ROLLER
18 70000 8625 170000
PRESS ROLLER
18 70000 8625 170000
SEPARATION FINGER(FUSER)
18 70000 8625 170000
S/N: xxxxxxxxx
TOSHIBA e-STUDIOxxx
TOTAL: 9999999
DF TOTAL: 9999999