3
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A
OUTLINE OF THE MACHINE
3 - 3
A6 Automatic original detection sensor-2 S10 <20H/23H/25H, 23HA/28HA only>
B1 Laser optical unit
B2 Polygonal motor M4
C1 Drawer feed roller
C3 Drawer separation pad
C4 Paper empty sensor S5
C5 Registration sensor S2
C6 Registration roller (metal)
C7 Registration roller (rubber)
E1 Bypass feed roller
E2 Bypass separation pad
E3 Bypass paper sensor S6
E4 Bypass tray
F1 Needle electrode
F2 Main charger
F3 Main charger grid
F4 Toner cartridge
G1 Transfer roller
H1 Drum
H2 Discharge LED
H3 Drum cleaning blade
H4 Recovery blade
H5 Drum separation finger
H6 Toner recovery auger
I1 Developer sleeve (Magnetic roller)
I2 Mixer-1
I3 Mixer-2
I4 Doctor blade
I6 Auto-toner sensor S4
I7 Drum thermistor THMS4
I8 Drum damp heater DH1
J1 Fuser roller
J2 Pressure roller
J3 Separation finger
J4 Heater lamp LAMP1
J5 Side heater lamp LAMP2
J6 Center thermistor / side thermistor / edge thermistor THMS1/2/3
J7 Fuser center thermostat / Fuser front thermostat THMO1/THMO2
J8 Exit roller
J9 Exit sensor S3
K1 Toner supply cover opening/closing switch SW4
K2 Toner supply cover opening/closing interlock switch SW3
K3 Temperature/humidity sensor S1
K4 Switching regulator
K5 Right cover opening/closing interlock switch SW2
L1 Upper transport roller (Option)
To Next Page
Loading...
