e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
ERROR CODE AND TROUBLESHOOTING
8 - 76
Drum 12 Is there a foreign matter on the drum
surface?
Replace the drum. If there is a
convex foreign matter adhering to the
drum surface, it indicates that the
blade edge at this area is worn out. In
this case, replace both the drum and
the drum cleaning blade.
13 Is there any foreign matter around
the aperture on the laser incoming
side of the process unit?
Remove the foreign matter.
Laser light path 14 Is there any foreign matter on frame
of the slit window of the metal plate
between the laser optical unit and the
process unit?
Remove the foreign matter.
Laser optical unit 15 Dose any foreign matter blocking the
laser light path adhere on the frame
of the laser outgoing window?
Remove the foreign matter.
Defective area Step Check items Prescription
To Next Page
Loading...
