e-STUDIO200L/202L/203L/230/232/233/280/282/283 © 2004 - 2007 TOSHIBA TEC CORPORATION All rights reserved
ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 82
916 Image Range correc-
tion on origi-
nal set on the
RADF
Custom
Mode 1
PPC EUR:12
UC:12
JPN:22
<11-14,
21-24,
31-34,
41-44>
SYS Set whether the values
of the background peak
and text peak are fixed
or not. One's place is an
adjustment for “auto-
matic density” and ten's
place is for “manual den-
sity”. Once they are
fixed, the range correc-
tion is performed with
standard values. The
values of the background
peak and text peak affect
the reproduction of the
background density and
text density respectively.
1: fixed/fixed
2: varied/fixed
3: fixed/varied
4: varied/varied
* Background peak/
Text peak
1
917 Custom
Mode 2
PPC 22
<11-14,
21-24,
31-34,
41-44>
SYS 1
918 Custom
Mode 3
PPC 12
<11-14,
21-24,
31-34,
41-44>
SYS 1
919 Image Range correc-
tion
Background
peak adjust-
ment
Custom
Mode 1
PPC 40
<0-255>
SYS When the value
increases, the back-
ground becomes more
brightened.
1
920 Custom
Mode 2
PPC 64
<0-255>
SYS 1
921 Custom
Mode 3
PPC 16
<0-255>
SYS 1
922 Image Sharpness
adjustment
Custom
Mode 1
PPC 1
<0-99>
SYS When the value
increases, the image
becomes sharper. When
the value decreases, the
image becomes softer.
The smaller the value is,
the less the moire
becomes.
One's place: Fixed value
(05-922 is “1”, 05-923 is
“5”, 05-924 is “2”)
Ten’s place: Adjustable
from 0 to 9 regarding the
default value as the stan-
dard (The larger the
value is, the sharper the
image becomes.)
* When entering “0” on
the ten's place, this
value is not displayed
on the entry screen.
1
923 Custom
Mode 2
PPC EUR:45
UC:45
JPN:45
<0-99>
SYS 1
924 Custom
Mode 3
PPC 2
<0-99>
SYS 1
928 Image Adjustment of
smudged/faint
text
Custom
Mode 1
PPC 2
<0-4>
SYS Adjustment of the
smudged/faint text.
With increasing the
value, the faint text is
suppressed, and with
decreasing it, the
smudged text is sup-
pressed.
1
Adjustment mode (05) <e-STUDIO202L/203L/232/233/282/283>
Code
Classi-
fication
Items
Func-
tion
Default
<Accept-
able
value>
RAM Contents
Proce-
dure
07/11
To Next Page
Loading...
