Toshiba E-studio230L - Page 190

e-STUDIO200L/202L/203L/230/232/233/280/282/283 © 2004 - 2007 TOSHIBA TEC CORPORATION All rights reserved
ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 154
Procedure 7
Procedure 9
Procedure 10
Procedure 11 and 12
*1. Press [MONITOR/PAUSE] to enter “-”, when entering telephone number.
*2. The data are stored in SYS-RAM in procedure 11 and stored in NIC-RAM in procedure 12.
Procedure 14
[0][8]
[POWER]
[POWER] OFF/ON
(Exit)
[Digital key]
(Code)
[Digital key]
(Setting)
[CLEAR]
(Corrects value)
[START]
(HDD formatting)
[CANCEL]
[ENTER]
or
[INTERRUPT]
(Stores value in RAM)
[0][8]
[POWER]
[POWER] OFF/ON
(Exit)
[Digital key]
(Code)
[Select icon]
[START]
[CANCEL]
[ENTER]
or
[INTERRUPT]
[CLEAR]
(Corrects value)
(Stores value in RAM)
[0][8]
[POWER]
[POWER]
OFF/ON
(Exit)
[Digital key]
(Code)
[Digital key]
(1st setting)
[Digital key]
(2nd setting)
[START] [START]
[CANCEL]
[ENTER]
or
[INTERRUPT]
[CLEAR]
(Corrects value)
[CLEAR]
(Corrects value)
(Stores value in RAM)
[0][8]
[POWER]
[POWER] OFF/ON
(Exit)
[Digital key]
(Code)
[Digital key]
or
[Software keyboard]
[START]
[CANCEL]
[CLEAR]
(Corrects value)
*2
(Stores value in RAM)
*1
[MONITOR/PAUSE]
Sets or
changes value
[ENTER]
[0][8]
[POWER]
[POWER]
OFF/ON
(Exit)
[Digital key]
(Code)
[Digital key]
(Sub-code)
[CLEAR]
(Corrects value)
[START] [START]
[CANCEL]
[ENTER]
or
[INTERRUPT]
Adjustment value
cannot be changed
05/12