Toshiba E-studio230L - Page 301

© 2004 - 2007 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO200L/202L/203L/230/232/233/280/282/283
ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 265
2
- Pixel count (%)
Pixel count (%) shows the ratio of laser emitting pixels to all pixels on standard paper.
The examples of pixel count are as follows:
Ex.)
Printing 5 pages on A4/LT size with solid copy (Laser emits to all pixels.)
→ Pixel count: 100%, Print count: 5
Printing 5 pages on A4/LT size with blank copy (Laser never emits.)
→ Pixel count: 0%, Print count: 5
Printing 2 pages on A4/LT size with solid copy (Laser emits to all pixels.)
Printing 2 pages on A4/LT size with blank copy (Laser never emits.)
→ Pixel count: 50%, Print count: 4
Printing 3 pages on A4/LT size with 6% of laser emission
Printing 1 page on A4/LT size with 2% of laser emission
→ Pixel count: 5%, Print count: 4
Printing 2 pages on A3/LD size with solid copy (Laser emits to all pixels.)
→ Pixel count: 100%, Print count: 4
Printing 2 pages on A3/LD size with 6% of laser emission
→ Pixel count: 6%, Print count: 4
- Average pixel count (%) and latest pixel count (%)
There are 2 types of the value calculated as the pixel count, average pixel count (%) and latest
pixel count (%).
Average pixel count (%)
The average value of all pixel count data after each reference data is cleared is calculated and
displayed.
Latest pixel count (%)
The value is displayed for printing just before the pixel counter is confirmed.
Note: Note:
In the following examples, ‘solid copy’ is considered to be 100%. But since the image has 4
margins, it never becomes 100% actually.
06/09