Toshiba E-studio230L - Page 361

© 2004 - 2007 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO200L/202L/203L/230/232/233/280/282/283
ADJUSTMENT
3 - 43
3
(3) Put the carriage-1 on the rail, make the sections C and D of it touch with the inside of the exit
side frame and screw up the front/rear sides of the bracket to fix it.
Note: Note:
Make sure that the sections A and B of the carriage-2 touch with the exit side frame.
Fig. 3-32
Carriage-1
[Rear]
[Front]
Exit side frame
Bracket
Bracket
C
D