Toshiba E-studio230L - Page 370

e-STUDIO200L/202L/203L/230/232/233/280/282/283 © 2004 - 2007 TOSHIBA TEC CORPORATION All rights reserved
ADJUSTMENT
3 - 52
(9) Attach the developer material cover and
tighten 2 screws.
Note: Note:
After the developer material has been
replaced, adjust the auto-toner sensor.
(See  P.3-1 "3.1 Adjustment of Auto-Toner
Sensor".)
Fig. 3-49
Developer
material cover