Toshiba E-studio230L - Page 389

© 2004 - 2007 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO200L/202L/203L/230/232/233/280/282/283
ADJUSTMENT
3 - 71
3
(3) Loosen the hinge screws at the front side.
Fig. 3-84
(4) Position the pins with the holes on the RADF
by moving it so that the pins fit into the holes
when the RADF is closed.
Fig. 3-85
(5) Tighten the left-hand hinge screw at the rear
side.
Fig. 3-86
05/11