© 2004 - 2007 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO200L/202L/203L/230/232/233/280/282/283
FIRMWARE UPDATING
6 - 25
6
<Updating Scanner ROM>
(1) Install the ROM to the download jig.
Make sure the direction is correct (P.6-4 "Fig. 6-3").
(2) Turn OFF the power of the equipment.
(3) Take off the right upper cover-1.
Fig. 6-23
(4) Take off the right upper cover-2.
Fig. 6-24
Right upper cover-1
Right upper cover-2
To Next Page
Loading...
