e-STUDIO200L/202L/203L/230/232/233/280/282/283 © 2004 - 2007 TOSHIBA TEC CORPORATION All rights reserved
FIRMWARE UPDATING
6 - 66
(11) Select the data file to be updated and click the [OK] button.
There are two data filing methods: Selecting the multiple data files in a batch (select the folder
where the files are saved) and selecting each data file individually.
• Selecting the multiple data files in a batch
- Select “Download File Folder”.
- Click the [Browse] button and select the folder where the files are saved.
Fig. 6-73
• Selecting each data file individually
- Select “File Name Conversion”.
- Click the [Browse] button of each data and select the file. When “Generic Driver” is used,
check the checkbox of the file to be selected.
Fig. 6-74
To Next Page
Loading...
