5 SETUP FLOW
84 SETUP FLOW FOR FAX FEATURES
Set up the IPv6 Assign the IP address, prefix, Gateway address.
Reference: USER FUNCTIONS GUIDE
y Chapter 4 “SETTING ITEMS (ADMIN)”
“3. SETTING NETWORK FUNCTIONS”
“Setting the TCP/IP Protocol (IPv6)”
Reference: TopAccess Guide
y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
“Setting up from TopAccess”
“Setting up Network Settings”
“Setting up the IPv6”
Set up the Internet Fax
Setting
An administrator should specify the “from Address”, “from name”, and body
text that applies to the internet fax.
Reference: USER FUNCTIONS GUIDE
y Chapter 4 “SETTING ITEMS (ADMIN)”
“8. SETTING INTERNET FAX FUNCTIONS”
Reference: TopAccess Guide
y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
“Setting up from TopAccess”
“Setting up Internet Fax Settings”
“Setting up the Internet Fax Settings”
Set up the DNS Server An administrator should configure the DNS Server and SMTP Server in your
network.
Reference: Network Administration Guide
y Chapter 1 “SETTING UP NETWORK SERVER”
“Setting up DNS and Mail Servers”
Set up the DNS Configure the DNS settings using TopAccess to enable receiving internet
faxes from the Internet. Also, if the DNS server supports the Dynamic DNS,
enable the DDNS as well.
Reference: TopAccess Guide
y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
“Setting up from TopAccess”
“Setting up Network Settings”
“Setting up the DNS Session”
y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
“Setting up from TopAccess”
“Setting up Network Settings”
“Setting up the DDNS Session”
Set up the SMTP Net-
work Service
Specifying the SMTP Server using TopAccess for this equipment works as a
SMTP server.
Reference: TopAccess Guide
y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
“Setting up from TopAccess”
“Setting up Network Settings”
“Setting up the SMTP Server”
Setup Flow Description/Reference
To Next Page
Loading...
