4.EDITING FUNCTIONS
Cover Sheet 109
4 EDITING FUNCTIONS
4
Press [COVER SHEET] on the EDIT menu.
5
Select the desired cover sheet mode.
When you select [TOP COPIED] or [TOP COPIED BACK BLANK] and [1->2 DUPLEX] (duplex copying)
together, the front cover will be a 1-sided copy.
6
Press the [BASIC] tab to display the BASIC menu. Then select a drawer in which
normal paper is placed (not the one for the cover sheets).
You must place the normal paper of the same size and direction as that for the cover sheets in advance.
7
Select other copy modes as required, and then press the [START] button on the control
panel.
When the originals are placed on the RADF (optional), scanning and copying start.
When they are placed on the original glass, follow steps 8 and 9.
To Next Page
Loading...
Need help?
General
