Toshiba e-studio2330c Copying Guide

3 BASIC COPY MODES
Density Adjustment 57
Density Adjustment
This equipment detects the density level of originals and automatically adjusts the density level of the copied image to the
optimal one. Alternatively, you can manually adjust it to the desired level.
Adjusting automatically (automatic density adjustment)
Press [AUTO] on the touch panel.
The automatic density adjustment is set by default at installation.
Adjusting manually
Press either or to select the desired density level.

Toshiba e-studio2330c Specifications

General

Brand	Toshiba
Model	e-studio2330c
Category	All in One Printer
Language	English