3 BASIC COPY MODES
62 Enlargement and Reduction Copying
Specifying reproduction ratio manually
1
Place paper in the drawer(s).
2
Place the original(s).
3
Press [ZOOM] on the touch panel.
4
Press the buttons below to select the desired reproduction ratio.
[UP] and [DOWN] buttons
The reproduction ratio changes by 1% every time either of them is pressed. When you hold either down, the
ratio goes up or down automatically.
One-touch zoom buttons
Select the desired ratio from [400%], [200%], [100%], [50%] and [25%].
When the RADF (optional) is used, the maximum ratio available is 200%.
To Next Page
Loading...
Need help?
General
