3.BASIC COPY MODES
Before Using Copying Functions 51
3 BASIC COPY MODES
Clearing the set functions
If you want to clear any settings of the EDIT menu, press the button of the desired functions.
P.87 “EDITING FUNCTIONS”
If you want to clear any setting of the IMAGE menu, reset the adjustment value in the setting menu of the desired
functions.
P.129 “IMAGE ADJUSTMENT”
Clearing all settings changed
When you press the [FUNCTION CLEAR] button on the control panel, all the function changes will be cleared.
Even if you do not press the [FUNCTION CLEAR] button, the changes will be cleared if the equipment is left idle for 45
sec. (default setting). For how to change this period, refer to the MFP Management Guide.
Restrictions on function combinations
Several copy functions can be used together. However some functions may not be used with other ones. For details, see
the following page:
P.164 “Copying Function Combination Matrix”
To Next Page
Loading...
Need help?
General
