6.TEMPLATES
Changing Data 147
6 TEMPLATES
Changing template data
1
In the template menu, select the group to which the desired template is registered.
1) Press the [REGISTRATION] tab.
2) Press the button for the desired group.
3) Press [OPEN].
To switch the menu
y Press or .
y Key in the group number (3 digits).
2
Enter the password as follows and then press [OK].
When the public template group is selected: Press [PASSWORD] and then enter the Admin Password (6 to 10
digits) with the buttons on the touch panel or the digital keys on the control panel.
When a private group is selected: Key in a 5-digit password set for the selected group. If no password is set, go
to step 3.
When you enter the wrong Admin Password 3 times consecutively, this equipment will be locked for 30
seconds. In this case, wait until it is unlocked and then enter the correct password.
To Next Page
Loading...
Need help?
General
