8 SPECIFICATIONS
106 e-STUDIO2505 Specifications
e-STUDIO2505 Specifications
y These specifications vary depending on the copying conditions and the environment.
y Specifications and appearance are subject to change without notice in the interest of product improvement.
Model name DP-2505
Type Desktop type
Original glass Fixed
Printing (copying) system Indirect electrophotographic method
Developing system 2-component magnetic brush developing
Fusing method One halogen lamp
Photosensor type OPC
Original scanning system Flat surface scanning system
(When the Automatic Document Feeder is installed: Fixed scanning system by
feeding the original)
Original scanning sensor Linear CMOS sensor
Scanning light source LED
Resolution Writing 2400 dpi x 600 dpi (Smoothing process)
Scanning 600 dpi x 600 dpi
Acceptable originals Sheets and books
Acceptable original size Original glass: Max. A4 or LT
ADF: Max. A3 or LD
Acceptable paper size Drawer A4, 16K, LT
Bypass A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO, LD, LG, LT, LT-R, ST-R, COMP,
13"LG, 8.5"SQ, 8K, 16K, 16K-R
Acceptable paper weight Drawer
64 - 80 g/m
2
(17 - 20 lb. Bond)
Bypass
64 - 80 g/m
2
(17 - 20 lb. Bond): for continuous feed
52 - 63 g/m
2
(14 lb. Bond - 17 lb. Bond), 81 - 163 g/m
2
(21 lb. Bond - 43 lb.
Bond): for single feed
Warm-up time Approx. 20 seconds
First copy time (A4 or LT portrait) LT: Approx. 7.1 seconds
A4: Approx. 7.0 seconds
Continuous copy speed See P.107 “Continuous copying speed”
Multiple copying Up to 999 copies
Excluded image width Copy Leading edge: 3.0±2.0 mm (0.12"±0.08")
Trailing edge: 2.0±2.0 mm (0.08"±0.08")
Both edges: 2.0±2.0 mm (0.08"±0.08")
Printer Leading edge: 3.0±2.0 mm (0.12"±0.08")
Trailing edge: 2.0±2.0 mm (0.08"±0.08")
Both edges: 2.0±2.0 mm (0.08"±0.08")
Reproduction ratio Actual size 100±0.5%
Zoom 25 - 400% (in 1% increments)
Storage capacity Max. 50 sheets or until the memory is full (TOSHIBA’s own chart)
Paper supply Drawer
250 sheets (80 g/m
2
, 20 lb. Bond)
Bypass
50 sheets (80 g/m
2
, 20 lb. Bond)
Loading capacity for the receiving tray
Approx. 100 sheets (80 g/m
2
, 20 lb. Bond)
Toner density adjustment Magnetic auto-toner system
Exposure control Automatic plus manual selection from 9 exposure steps
Memory 128 MB
USB interface USB2.0 (Hi-Speed)
Environment (for normal use) Temperature: 10 º - 30 ºC, Humidity: 20 - 85% (No condensation)
Power requirements and power consumption
(including optional equipments)
AC 220-240 V±10%, 8 A (50-60 Hz): 1.0 kW or less
AC 120 V±10%, 12 A (60 Hz): 1.0 kW or less
Dimensions (including equipment and platen cover) 390 mm (15.4") (W) x 540 mm (21.3") (D) x 435 mm (17.1") (H)
Weight (including equipment and drum) Approx. 22.0kg (48.5 lb.) (Approx. 20.5 kg (45.2 lb.) for some destinations)
Space occupied (equipment only) 850 mm (33.5") (W) x 540 mm (21.3") (D)
To Next Page
Loading...
