2 COPY FUNCTIONS
30 Basic Copy Procedure
y If the paper source runs out of paper, an error message is displayed on the LCD screen and copying stops. Load
paper. The equipment automatically resumes copying after approx. 3 seconds have passed.
y The receiving tray can hold up to 100 sheets. If the excessive paper error occurs, the lamp blinks and an error
message is displayed on the LCD screen. Remove the paper from the tray and press [START] to resume copying.
y When you use overhead transparencies, remove them one by one every time they are ejected. Otherwise, they
could be curled and not be good for projection.
To Next Page
Loading...
