2 COPY FUNCTIONS
42 Copy Settings
3
Follow the instructions on the LCD screen to use the “2IN1/4IN1” function. You are
instructed to make the following settings.
y ORIGINAL SIZE
Press or to select the size of the original.
y ORIG. ORIENTATION
Press or to select the portrait or landscape orientation of the original.
y SET ORIGINAL
Place the originals as shown on the LCD screen. Make sure that you place the original in the same orientation
as the one selected in “ORIG. ORIENTATION”.
y NEXT ORIGINAL?
When you place the original on the original glass, this message appears. Press or to select “SCAN NEXT
PAGE”. Select “FINISHED” when you have finished scanning your originals.
“CANCEL JOB?” is displayed if there is no operation for a certain period.
To Next Page
Loading...
