Toshiba E-studio2555cse Software Installation Guide

5 INSTALLING PRINTER DRIVERS FOR UNIX/Linux
174 Setting Up the UNIX/Linux Filters
5
Create the following file.
/opt/toshiba/tap/interface/<queue name>.conf
6
Add a line as below in the <queue name>.conf.
dest=<IP address>
7
Save the file.
8
Enter the following command:
Color MFP:
cp /opt/toshiba/tap/model/net_estcolor \
/opt/toshiba/tap/interface/<queue name>
Black and White MFP:
cp /opt/toshiba/tap/model/net_estbw \
/opt/toshiba/tap/interface/<queue name>
9
Enter the following command:
/opt/toshiba/tap/bin/modPrintcap \
-a <queue name> <IP address>
10
Enter the following command:
ls /opt/toshiba/tap/bin/flag_<queue name>
The file in step 10 does not exist when the operations from step 1 to 9 are correctly performed. In
that case, the operation of step 11 is not required to be performed. Skip to step 12.
11
If the above file exists, enter the following command.
/opt/toshiba/tap/bin/printconf_import \
-a <queue name> <IP_ADDRESS>
rm /opt/toshiba/tap/bin/flag_<queue name>
12
Restart your lpd.
Creating a print queue manually on Open UNIX
1
Log on to the root account.
2
Open your UNIX/Linux editor.
3
Create the following file.
/usr/spool/lp/admins/lp/interfaces/<queue name>.conf
4
Add a line as below in the <queue name>.conf.
dest=<IP address>
5
Save the file.
6
Enter the following command:
chmod +x <queue name>.conf
7
Enter the following command:
chown lp:lp <queue name>.conf
8
Enter the following command:
Color MFP:
lpadmin -p <queue name> -v /dev/null -I any \
-i /usr/lib/lp/model/net_estcolor
Black and White MFP:
lpadmin -p <queue name> -v /dev/null -I any \
-i /usr/lib/lp/model/net_estbw
9
Enter the following command:
accept <queue name>

Toshiba E-studio2555cse Specifications

General

Brand	Toshiba
Model	E-studio2555cse
Category	All in One Printer
Language	English