6 INSTALLING SCAN DRIVER AND UTILITIES
202 Before Installation
Before Installation
This section describes the installation of the scan driver and utilities. Before installing them, read this section.
Type of scan driver and utilities
Install the following utilities to use the network scan functions.
TWAIN driver
This software component enables you to import e-Filing documents into TWAIN-compliant applications.
File Downloader
This software component enables you to import e-Filing documents into your hard disk.
Remote Scan driver
You can use Remote Scan driver to import the scanned images into your TWAIN-compliant application.
WIA driver
You can use Remote Scan driver to import the scanned images into your WIA-compliant application.
System requirements
To install the scan driver and utilities on a Windows computer, the following is required.
Display resolution
1024 x 768 dots or more
Display color
High Color (16 bit) or higher is recommended
CPU
Pentium 133 MHz minimum (Pentium 266 MHz or faster recommended)
OS
Windows Vista Service Pack 2
Windows 7 (Service Pack 1 recommended)
Windows 8
Windows Server 2003 Service Pack 2
Windows Server 2008 Service Pack 2
Windows Server 2012
WIA driver is not supported by 64-bit editions of Windows Server 2003.
When the scan driver and utilities have been installed
If the scan driver and utilities have been installed from another e-STUDIO Install Disc, uninstall them, then
install again from the Install Disc.
When you uninstall the software, click [No] at the dialog box that displays the message to delete the settings
for the scan driver and utilities so that you can restore the settings after installing the new one.
To Next Page
Loading...
Need help?
General
