Toshiba e-studio263cs User Manual (English)

Questions and Answers:

K
Kimberly PenaAug 20, 2025
How to fix vertical white lines on Toshiba e-studio263cs All in One Printer?
- C
  Cheyenne RamseyAug 20, 2025
  If you're seeing vertical white lines on your printed pages from your Toshiba All in One Printer, it could be due to a few reasons. The LED head might be dirty, in which case you should wipe it with a soft, lint-free cloth. Another cause could be low toner; try opening the top cover and tapping the cartridge to redistribute the toner, or replace the cartridge if the problem continues. Also, foreign materials in the image drum or a dirty light-shielding film of the image drum cartridge can cause this issue, so you may need to replace the image drum cartridge or wipe the film with a soft, lint-free cloth.
S
Stephanie WilliamsAug 21, 2025
Why is my Toshiba All in One Printer printing so light?
- S
  Sherri JohnsonAug 21, 2025
  If the print quality from your Toshiba All in One Printer is too light, several factors could be responsible. First, ensure the toner cartridge is correctly installed by reinstalling it. Low toner can also cause light printing; try opening the top cover and tapping the cartridge to redistribute the toner, replacing it if needed. The paper itself might be the issue – make sure it's stored in proper conditions, is the recommended type, and the thickness is appropriately set in the Media menu. If you're using recycled paper, try setting one value thicker for media weight in the Media menu.
J
Jessica HoweAug 25, 2025
How to get rid of vertical lines on Toshiba All in One Printer prints?
- W
  William Dennis DDSAug 25, 2025
  If vertical lines are appearing on your printouts from the Toshiba All in One Printer, it could be due to a damaged image drum cartridge, which would require replacement. Another potential cause is low toner. In this case, open the top cover and tap the cartridge a few times to evenly distribute any remaining toner. If the lines persist, replace the toner cartridge.
J
Jonathan AllenAug 26, 2025
Why are images fading vertically on my Toshiba All in One Printer?
- C
  Craig WalkerAug 26, 2025
  If your Toshiba All in One Printer is producing images that are fading vertically, a dirty LED head could be the culprit; try wiping it with a soft, lint-free cloth. Alternatively, low toner might be the cause. Open the top cover and tap the cartridge a few times to evenly distribute any remaining toner. If fading persists, replace the toner cartridge. Finally, ensure you are using paper that is suitable for your printer.
K
Kimberly RamirezAug 27, 2025
What to do if horizontal lines and spots appear periodically on Toshiba e-studio263cs All in One Printer prints?
- W
  washingtoncarlosAug 27, 2025
  If you notice horizontal lines and spots appearing periodically on printouts from your Toshiba All in One Printer, the cause depends on the interval between them. If the interval is about 94mm (4in), the image drum (the green tube) may be damaged or dirty; try wiping it lightly with a soft cloth, and replace it if damaged. For intervals around 30mm (1.2in), there might be foreign particles in the image drum cartridge; try opening and closing the top cover and printing again. If the interval is about 86mm (3.4in), the fuser unit could be damaged, requiring replacement. Lastly, if the image drum cartridge has been exposed to light, replace it if the problem continues.
J
Joseph VaughnAug 29, 2025
Why does toner come off when rubbed on prints from my Toshiba e-studio263cs?
- A
  Amy RobertsAug 30, 2025
  If toner is coming off when you rub printed pages from your Toshiba All in One Printer, it's likely due to incorrect paper settings. Ensure the media type and weight are correctly set in the Media menu, or try setting one value lighter for media weight. If you're using recycled paper, try setting one value thicker for media weight in the Media menu.
C
Cynthia GreenAug 31, 2025
Why is the white area of paper lightly stained when printing with my Toshiba All in One Printer?
- C
  cpetersonSep 1, 2025
  If the white areas of paper are lightly stained when printing with your Toshiba All in One Printer, it could be due to static in the paper; ensure the paper is stored in proper temperature and humidity conditions. Also, using paper that is too thick can cause this issue, so try using thinner paper. Low toner may also be the cause, so open the top cover and tap the cartridge a few times to evenly distribute any remaining toner. If the staining persists, replace the toner cartridge.
G
Gary RomeroSep 2, 2025
What causes partially faded images on my Toshiba e-studio263cs?
- L
  longtimothySep 2, 2025
  If you're experiencing partially faded images with white spots and lines in solid prints from your Toshiba All in One Printer, the paper may be the issue. Ensure that the paper is stored in proper temperature and humidity conditions, as moist or dry paper can cause these problems.
M
Mitchell MatthewsSep 4, 2025
How to resolve smudged letters on my Toshiba e-studio263cs?
- R
  ricecynthiaSep 5, 2025
  If the periphery of letters is smudged when printing with your Toshiba All in One Printer, the LED head might be dirty. Try wiping the LED head with a soft, lint-free cloth.
P
Patrick GarzaSep 6, 2025
What to do if glossiness is not uniform on Toshiba All in One Printer prints?
- S
  Sandra DoyleSep 7, 2025
  If the glossiness is not uniform on prints from your Toshiba All in One Printer, the thickness and type of paper may be incorrectly set. Set the correct value of media type and media weight in the Media menu or set one value lighter for media weight.

Toshiba e-studio263cs Specifications

General

Functions	Print, Copy, Scan, Fax
Print Speed (Black)	26 ppm
Print Speed (Color)	26 ppm
Print Resolution	600 x 600 dpi
Copy Speed (Black)	26 cpm
Copy Speed (Color)	26 cpm
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Fax Transmission Speed	33.6 Kbps
Duplex Printing	Yes
Connectivity	USB 2.0
Type	Laser
Paper Size	A4, A5, A6, B5, Legal, Letter
Network Connectivity	Ethernet 10/100Base-TX