8
© 2004 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO200L/202L/203L/230/232/233/280/282/283
LASER OPTICAL UNIT
8 - 9
8.6 Disassembly and Replacement
[A] Laser optical unit
(1) Take off the toner cartridge.
(2) Take off the inner tray and tray back cover
( P.2-35 "[K] Inner tray", P.2-36 "[M]
Tray back cover").
(3) Lift the duct and disconnect 1 connector.
Fig. 8-10
(4) Remove 2 screws and take off the plate.
Fig. 8-11
(5) Disconnect 1 connector from the rear frame.
Disconnect 2 connectors from the LRL
board.
Fig. 8-12
Duct
Plate
05/07
To Next Page
Loading...
