2
© 2004 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO200L/202L/203L/230/232/233/280/282/283
OUTLINE OF THE MACHINE
2 - 41
2.5.2 PC boards
Note:
When the PC board/HDD is replaced, refer to each CAUTIONS of TROUBLESHOOTHING in the
SERVICE HANDBOOK.
[A] Hard disk (HDD)
[A-1] e-STUDIO200L/230/230L/280/280S
(1) Take off the rear cover
( P.2-31 "[C] Rear cover").
(2) Loosen 4 screws and take off the bridge
bracket.
Fig. 2-44
(3) Loosen 6 screws and take off the SYS board
lower cover.
Fig. 2-45
Bridge bracket
SYS board lower cover
05/11
To Next Page
Loading...
