e-STUDIO200L/202L/203L/230/232/233/280/282/283 © 2004 - 2008 TOSHIBA TEC CORPORATION All rights reserved
OUTLINE OF THE MACHINE
2 - 42
[A-2] e-STUDIO202L/203L/232/233/232S/282/283/282S/283S
(4) Loosen 5 screws, disconnect 2 connectors
and take off the SYS board upper cover.
Fig. 2-46
(5) Remove 4 screws and take off the HDD from
the SYS board upper cover.
Fig. 2-47
(1) Take off the rear cover ( P.2-31 "[C] Rear
cover").
(2) Loosen 4 screws and take off the bridge
bracket.
Fig. 2-48
SYS board
upper cover
HDD
SYS board
upper cover
Bridge bracket
07/11
To Next Page
Loading...
