13
© 2004 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO200L/202L/203L/230/232/233/280/282/283
FUSER UNIT
13 - 11
13.5 Disassembly and Replacement
[A] Fuser unit
(1) Take off the right rear cover
( P.2-37 "[N] Right rear cover").
(2) Disconnect 2 connectors, remove 2 screws,
and then take off the fuser unit.
Notes:
1. Be careful when handling the fuser unit as
it may become very hot.
2. Be careful not to hold the center part
(shaded part in the figure at right).
Fig. 13-7
Fig. 13-8
Fuser unit
Connector
Connector
To Next Page
Loading...
