e-STUDIO200L/202L/203L/230/232/233/280/282/283 © 2004 - 2008 TOSHIBA TEC CORPORATION All rights reserved
OUTLINE OF THE MACHINE
2 - 38
[O-2] e-STUDIO202L/203L/232/233/232S/282/283/282S/283S
[P] Right front hinge cover
(1) Take off the right upper cover-3
( P.2-34 "[H] Right upper cover-3").
(2) Remove the connecting port cover while
releasing 2 hooks.
Fig. 2-39
(1) Pull out the upper and lower drawers.
(2) Remove 2 screws and take off the right front
hinge cover.
Note:
When the ADU is installed, refer to chapter
15.5 ( P.15-10 "[A] Automatic Duplexing
Unit (ADU)").
Fig. 2-40
Connecting
port cover
Right front hinge cover
07/11
To Next Page
Loading...
