e-STUDIO2020C/2330C/2820C/2830C/3520C/3530C/4520C © 2008 - 2011 TOSHIBA TEC CORPORATION All rights reserved
BACKUP FUNCTION
4 - 12
Fig. 4-10
<When “6: SRAM Data Restore” is selected>
* No items are selected in the screen by default.
Fig. 4-11
(5) Press the [START] button. The restore starts and the restoring status is displayed on the LCD
screen.
(6) “Restore Completed” is displayed on the LCD screen when restoring has been properly
completed.
(7) Turn the power OFF and remove the USB media.
* When “department management data” or “user management data” are restored, clear their
counter values in a procedure below.
(8) Counter values can be all cleared as the data are copied. Note that the total counter values are
not copied.
<Procedure>
Press the buttons as follows: [USER FUNCTIONS] [ADMIN] Enter the password
[COUNTER] [DEPARTMANT SETTING] Enter the password [RESET ALL
COUNTERS]
* Enable the department management when the [RESET ALL COUNTERS] buttons is set to be
disabled.
Number Restore Item
1. SRAM Restoring SRAM Data
Setting Restore
AdminSetting
1: Network/Print Service
2: SaveAsFile/Email/InternetFAX
3: Notification
4: Directory Service
Setting for Option
5: FAX Kit
6: WirelessLAN/Bluetooth Kit
7: COPY
8: General
9: User Management
To Next Page
Loading...
