Toshiba e-STUDIO347CS - Color Mode; Font Pitch; Page Length

PRINTING FROM UNIX/Linux
- 74 -
2
1
3
4
5
6
7
 Collate
The collate option can be selected using the following options.
f this option is not specified, the default value of “collate=on”
will be used.
Example: The command to select collate off is “lp -o collate=off
<filename>”.
 Orientation
The following orientation options are available.
If this option is not specified the command will not be sent so
the printer’s default value will be used.
Example: The command to specify landscape orientation is “lp
-o landscape <filename>”.
 Font Pitch
If the pitch is specified the net_estcolor program will always
select the Courier font; otherwise the default font is used. The
following options are used to select the font pitch.
In all the cases shown above the Courier font will also be
selected. When the pitch is changed, the font size will
automatically be scaled to the appropriate size.
If this option is not specified, the default pitch and font will be
used.
Example: The command to specify 8 characters per inch is “lp -
o pitch=8 <filename>”.
 Page Length
The number of lines to print on a page can be specified with the
following option.
As this equipment is a page printer we cannot change the
physical length of a piece of paper so the actual effect of this
command is to after the value for lines per inch so that the
requested number of lines is printed on the page. The actual
page length may differ from this value if the top margin or the
text length option is used.
If this option is not specified the PJL command will not be sent
so the printer’s default value will be used. The minimum page
length allowable is 5. If value is less than 5, the page length is
set to 5.
The command to specify 66 lines per page is “lp -o pl=66
<filename>”.
 Color Mode
This sets whether a print job is printed in color, mono, or twin
color. The color mode for printing mode can be selected using
the following options.
Example: The command to set the color mode for the print job
is “lp -o colormode=COLOR <filename>”
Option Value Alternate Value Description
collate=off OFF Cancel the collate printing
mode.
collate=on ON Set the collate printing
mode.
Option Value Alternate Value Description
portrait Print the document in
portrait orientation.
landscape Print the document in
landscape orientation.
Option Value Alternate Value Description
c pitch=16.67 Set the character pitch to
16.67 characters per inch.
10 pitch=10 Set the character pitch to
10 characters per inch.
12 pitch=12 Set the character pitch to
12 characters per inch.
pitch=value Set the character pitch to
value characters per inch.
Option Value Alternate Value Description
pl=value Set the lines per page to
value.
Option Value Alternate Value Description
colormode=
COLOR
color Set color mode printing for
the print mode.
colormode=
GRAYSCALE
grayscale Set grayscale mode
printing for the print mode.
colormode=
AUTO
auto Set auto color mode
printing for the print mode.
colormode=
2KR
2kr Set twin color mode (Black
and Red) printing for the
print mode.
colormode=
2KG
2kg Set twin color mode (Black
and Green) printing for the
print mode.
colormode=
2KB
2kb Set twin color mode (Black
and Blue) printing for the
print mode.
colormode=
2KC
2kc Set twin color mode (Black
and Cyan) printing for the
print mode.
colormode=
2KM
2km Set twin color mode (Black
and Magenta) printing for
the print mode.
colormode=
2KY
2ky Set twin color mode (Black
and Yellow) printing for the
print mode.
colormode=
2KW
2kw Set twin color mode (Black
and White) printing for the
print mode.