Toshiba e-STUDIO347CS - Pcl5 E Specific Options

PRINTING FROM UNIX/Linux
- 76 -
2
1
3
4
5
6
7
Example: The command to set “1” to the color balance for
black toner for the print job is “lp -o CBK=1 <filename>”
Note
• This function is enabled only when your equipment is a
multifunctional digital color system (color MFP).
 Image Attributes
The Image Attributes can be selected using the following
options.
Example: The command to set “1” to the brightness for the
print job is “lp -o brightness=1 <filename>”
Note
• This function is enabled only when your equipment is a
multifunctional digital color system (color MFP).
PCL5e specific options
Some of the options only apply to plain text or PCL5e files.
 Text Wrapping
The following options control text wrapping when it reaches the
right margin.
If this option is not specified, the command will not be sent so
the printer’s default value will be used.
Example: The command to specify wrapping is “lp -o wrap
<filename>”.
 Left Margin
The left margin position can be specified with the following
option.
If the left margin is set to the right of the right margin it will be
ignored.
If this option is not specified, the command will not be sent so
the printer’s default value will be used.
Example: The command to set the left margin to five columns
is “lp -o lm=5 <filename>”.
 Right Margin
The right margin position can be specified with the following
option.
If the right margin is set to the left of the left margin, or if it is set
to a position wider than the logical page, it will be ignored. The
right margin is specified in columns from the left margin. A
negative value will be ignored.
If this option is not specified, the command will not be sent so
the printer’s default value will be used.
Example: The command to set the right margin to fifty columns
is “lp -o rm=50 <filename>”.
 Top Margin
The top margin position can be specified with the following
option.
CBK=value Specify the color density
of black toner. You can
specify the following
values:
-4, -3, -2, -1, 0, 1, 2, 3, 4
Option Value Alternate Value Description
brightness=value Specify the brightness.
You can specify the
following values:
-4, -3, -2, -1, 0, 1, 2, 3, 4
contrast=value Specify the contrast. You
can specify the following
values:
-4, -3, -2, -1, 0, 1, 2, 3, 4
saturation=value Specify the saturation. You
can specify the following
values:
-4, -3, -2, -1, 0, 1, 2, 3, 4
sharpness=value Specify the sharpness.
You can specify the
following values:
-4, -3, -2, -1, 0, 1, 2, 3, 4
backgroundadju
stment=value
Specify the background
adjustment. You can
specify the following
values:
-4, -3, -2, -1, 0, 1, 2, 3, 4
Option Value Alternate Value Description
Option Value Alternate Value Description
wrap Enable automatic text
wrapping.
nowrap Disable automatic text
wrapping.
Option Value Alternate Value Description
lm=value Set the left margin to
value columns.
Option Value Alternate Value Description
rm=value Set the right margin to
value columns.
Option Value Alternate Value Description
tm=value Set the top margin to
value lines.