3.PRINTING FROM MAC OS APPLICATIONS
102 Setting the Paper and Reproduction Ratio
[305 x 457 mm], [12 x 18"], [320 x 450 mm], and [320 x 460 mm] are only available for the following models.
- e-STUDIO5005AC Series
Duplex printing with [320 x 450 mm] or [320 x 460 mm] is not available with the following models.
- e-STUDIO5005AC Series
Setting items differ depending on the model.
3
Set other printing functions as needed, and then click [OK].
4
Select [Print] from the [File] menu of the application.
5
Select the equipment in [Printer], and then specify the print settings.
6
Click [Print] to send the job.
Setting the Paper Source
Sets the paper source. You can set a different source for the first and remaining pages.
1
Select [Print] from the [File] menu of the application.
2
Set the paper source from the [Paper Feed] menu.
All: Uses the same paper source for all pages. When [Auto] is selected, paper is fed from a drawer containing the
same paper size as the document. When [Bypass Tray] is selected, load paper in the bypass tray.
For the Mac OS X 10.6.x to 10.8.x, [All] is displayed as [All Pages From].
First Page From/Remaining From: Specify different paper sources for the first page and remaining pages. Select
the sources in [First Page From] and [Remaining From]. When [Auto] is selected, paper is fed from a drawer
containing the same paper size as the document. When [Bypass Tray] is selected, load paper in the bypass tray.
3
Set other print functions, and then select this equipment from [Printer].
4
Click [Print] to send the job.
To Next Page
Loading...
