2.PRINTING FROM WINDOWS APPLICATIONS
80 Setting Optional Devices and User Authentication
Selecting [Universal] restricts the printer driver functions to those common to all printers on the network. This
is convenient for using other printers with your printer driver.
The TOSHIBA Universal Printer 2 printer driver has restrictions for usage as a Generic Model.
Option: Sets whether the following optional devices are installed.
Drawers: Sets whether or not the Paper Feed Unit (2nd drawer), Paper Feed Pedestal (3rd drawer), Drawer
Module (4th drawer), or Large Capacity Feeder is installed.
Finisher: Sets whether or not the Finisher, Saddle Stitch Finisher, Hanging Finisher, Inner Finisher, Job
Separator, or Offset Tray is installed.
Hole Punch Unit: Sets whether or not the Hole Punch Unit is installed.
External LCF: Sets whether or not the External Large Capacity Feeder is installed.
Inserter Unit: Sets whether or not the Inserter Unit is installed.
Automatic Duplexing Unit: Sets whether or not the Automatic Duplexing Unit is installed.
Hard disk: Sets whether or not the Hard disk is installed.
Available items differ depending on the model and the option configuration.
If you set any options on the [Device Settings] tab without two-way communication between this equipment
and your computer, 2-sided printing is automatically enabled.
4
Click [Drawer Settings].
5
Set the following options, and then click [OK].
Drawer 1: Select the size and type of paper that is loaded in the 1st Drawer.
Drawer 2: Select the size and type of paper that is loaded in the 2nd Drawer.
Drawer 3: Select the size and type of paper that is loaded in the 3rd Drawer.
Drawer 4: Select the size and type of paper that is loaded in the 4th Drawer.
LCF: Select the size and type of paper that is loaded in the Large Capacity Feeder when it is installed.
External LCF: Select the size and type of paper that is loaded in the External Large Capacity Feeder when it is
installed.
Bypass Tray: Select the type of paper that is loaded in the Bypass Tray.
Override Application Paper Source Settings: Select this to use the paper source setting in the printer driver
rather than the application setting.
6
Click [Apply] or [OK] to save.
To Next Page
Loading...
