e-STUDIO350/352/353/450/452/453 © 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 100
357 Counter Counter for lower drawer
feeding
ALL 0
<8 digits>
M Counts the number of
sheets fed from lower
drawer
2
358 Counter Counter for bypass feeding ALL 0
<8 digits>
M Counts the number of
sheets fed from bypass
feed
2
359 Counter Counter for LCF feeding ALL 0
<8 digits>
M Counts the number of
sheets fed from LCF
2
360 Counter Counter for PFP upper
drawer feeding
ALL 0
<8 digits>
M Counts the number of
sheets fed from PFP
upper drawer
2
370 Counter Counter for PFP lower
drawer feeding
ALL 0
<8 digits>
M Counts the number of
sheets fed from PFP
lower drawer
2
372 Counter Counter for ADU ALL 0
<8 digits>
M Counts the number of
output pages of duplex
printing.
2
374 Counter Counter for RADF ALL 0
<8 digits>
SYS Counts the number of
originals fed from RADF
2
381 Counter Setting for counter installed
externally
ALL 1
<0-7>
M Selects the job to count
up for the external
counter.
0: Not selected
1: Copier
2: FAX
3: Copier/FAX
4: Printer
5: Copier/Printer
6: Printer/FAX
7: Copier/Printer/FAX
1
390 Counter Number of errors in HDD
(Copier)
PPC 0
<8 digits>
SYS The number of error is
reset at HDD format-
ting.
2
391 Counter Number of errors in HDD
(FAX)
FAX 0
<8 digits>
SYS 2
392 Counter Number of errors in HDD
(Scanning)
SCN 0
<8 digits>
SYS 2
393 Counter Number of errors in HDD
(Printer)
PRT 0
<8 digits>
SYS 2
398 Laser Number of polygonal motor
rotational speed switching
ALL 0
<8 digits>
M Counts the number of
time the polygonal
motor has switched its
rotational speed
between normal rota-
tion and standby rota-
tion
2
399 Laser Accumulated time of polyg-
onal motor at normal rota-
tion
ALL 0
<8 digits>
M Accumulates the time
the polygonal motor has
rotated at normal rota-
tion.
2
Setting mode (08) <e-STUDIO350/450>
Code
Classifi-
cation
Items
Func-
tion
Default
<Accept-
able
value>
RAM Contents
Pro-
cedur
e
04/01
To Next Page
Loading...
