e-STUDIO350/352/353/450/452/453 © 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
ADJUSTMENT
3 - 98
3.13.4 Fine adjustment of binding/folding position (Saddle stitcher unit)
The binding position/folding position can be adjusted in the following (05) codes.
Increase the adjustment value when the sheet of paper which has exited is "A".
Decrease the adjustment value when the sheet of paper which has exited is "B".
Code Paper size Remarks
468-0 A4-R / LT-R When the value increases, the binding/folding posi-
tion shifts toward the right page. (0.25mm/step)
Acceptable values: -14 to 14 (Default: 0)
468-1 B4
468-2 A3 / LD
A: When the upper side of the folding is longer
than the lower side
B: When the upper side of the folding is shorter
than the lower side
Paper feeding direction Paper feeding direction
To Next Page
Loading...
