e-STUDIO350/352/353/450/452/453 © 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
SPECIFICATIONS / ACCESSORIES / OPTIONS / SUPPLIES
1 - 6
1.3.2 e-STUDIO352/353/452/453
Platen cover KA-3511PC
Reversing Automatic Document Feeder (RADF) MR-3018
Drawer module MY-1021/-C
Paper Feed Pedestal (PFP) KD-1011/-C
Large Capacity Feeder (LCF) KD-1012 LT/A4/A4-C
Finisher (Hanging type) : e-STUDIO352 only MJ-1022/-C
Finisher (Console type) MJ-1101
Finisher (Console type) MJ-1023/-C
Finisher (Console saddle stitcher type) MJ-1024/-C
Hole punch unit (for MJ-1101) MJ-6101 N/E/F/S
Hole punch unit (for MJ-1023/1024) MJ-6004 N/E/F/S
Staple cartridge STAPLE-1600 (for MJ-1022)
STAPLE-2400 (for MJ-1101)
STAPLE-2000 (for MJ-1023/1024)
STAPLE-600 (for saddle stitcher of MJ-1024)
Bridge kit KN-3520/-C
Job Separator MJ-5004/-C
Offset Tray MJ-5005/-C
Work Tray KK-3511
Damp Heater MF-3520 U/E
Fax Board GD-1200 NA/EU/AU/AS/C/TW/KR
2nd Line for Fax Board GD-1160 NA/EU-N/C/TW
Printer Kit GM-1060/1061
Printer/Scanner Kit GM-2060/2061
Scanner Kit GM-4060
Printer ELK GM-1120
Printer/Scanner ELK GM-2120
Scanner ELK GM-4120
Memory GC-1230
Scrambler board GP-1040
Wireless LAN module GN-1041
Bluetooth module GN-2010
Antenna GN-3010
Data overwrite kit GP-1060
PCI slot GO-1060
Desk MH-1700
e-BRIDGE ID Gate (HID iClass) KP-2004
e-BRIDGE ID Gate (MIFARE) KP-2005
Harness kit for coin controller GQ-1020
08/04
To Next Page
Loading...
