© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO350/352/353/450/452/453
ADJUSTMENT
3 - 41
3
[B] Adjusting carriages-1 and -2 positions
(1) Move the carriage-2 toward the exit side.
(2) Loosen the screws fixing the front side pulley bracket, make the sections A and B of the carriage-
2 touch with the inside of the exit side frame and screw them up.
Fig. 3-34
B
A
Carriage-2
Pulley bracket
Exit side frame
[Rear] [Front]
Enlarged view of carriage
To Next Page
Loading...
