e-STUDIO350/352/353/450/452/453 © 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 14
2) RFC related error
(When GM-1010/3010, GM-2010, GM-1060/4060, GM-2060, GM-1061/4060, GM-2061, GM-1120/
4120, or GM-2120 is installed)
Error code
Message displayed in
the TopAccess screen
Contents Troubleshooting
2500 Syntax error, command unrecog-
nized
HOST NAME error (RFC: 500)
Destination mail address error
(RFC: 500)
Terminal mail address error
(RFC: 500)
P. 5 -9 7
2501 Syntax error in parameters or argu-
ments
HOST NAME error (RFC: 501)
Destination mail address error
(RFC: 501)
Terminal mail address error
(RFC: 501)
P. 5 -9 7
2503 Bad sequence of commands Destination mail address error
(RFC: 503)
P. 5 -9 7
2504 Command parameter not imple-
mented
HOST NAME error
(RFC: 504)
P. 5 -9 7
2550 Mailbox unavailable Destination mail address error
(RFC: 550)
P. 5 -9 7
2551 User not local Destination mail address error
(RFC: 551)
P. 5 -9 7
2552 Insufficient system storage Terminal/Destination mail address
error
(RFC: 552)
P. 5 -9 7
2553 Mailbox name not allowed Destination mail address error
(RFC: 553)
P. 5 -9 7
07/11