© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO350/352/353/450/452/453
ADJUSTMENT
3 - 53
3
(3) Loosen the stepped screw 1 turn and 2
screws on the adjustment plate a half turn
(status of temporary fixing).
Fig. 3-57
(4) Remove the stepped screw at the rear of
right-hand hinge.
Fig. 3-58
(5) Open the RADF, and then loosen 2 hand
screws 1 turn (status of tentative fixing).
Fig. 3-59
Half turn
1 turn
Screw
To Next Page
Loading...
