© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO350/352/353/450/452/453
ADJUSTMENT
3 - 77
3
Duplex copying:
(1) Shift the aligning plate with the scale as the guide shown in the figure below to adjust the skew.
Fig. 3-104
(2) If the image skew is "C" as shown in the figure below, shift the aligning plate in the direction of "-
", and if "D", shift it to "+".
Fig. 3-105 Fig. 3-106
Shift the aligning plate in the direction of "-". Shift the aligning plate in the direction of "+".
C
D
05/11
To Next Page
Loading...
