e-STUDIO350/352/353/450/452/453 © 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 28
[FAX] button: OFF ([FAX] LED: OFF)
Digital
key
Button Items to check
Contents
Highlighted
display
e.g.
Normal dis-
play
e.g.
[1]
A- --
B LCF connection Not connected Connected
C Bypass unit connection Not connected Connected
D Bypass paper sensor No paper Paper present
E ADU connection Not connected Connected
F ADU opening/closing switch ADU opened ADU closed
G ADU exit sensor Paper present No paper
H ADU entrance sensor Paper present No paper
[2]
A PFP upper drawer detection switch Drawer not
installed
Drawer
present
B- --
C PFP upper drawer paper stock sensor Paper almost
empty
Paper present
D PFP upper drawer feed sensor Paper present No paper
E PFP connection Not connected Connected
F PFP side cover opening/closing switch Cover opened Cover closed
G PFP upper drawer empty sensor No paper Paper present
H PFP upper drawer tray-up sensor Tray at upper
limit position
Other than
upper limit
position
[3]
A LCF tray bottom sensor Tray at bottom
position
Other than
bottom posi-
tion
B LCF standby side paper mis-stacking sensor Correct stack-
ing
Incorrect
stacking
C- --
D- --
E LCF drawer detection switch Drawer not
installed
Drawer
present
F- --
G- --
H LCF feed side paper stock sensor Paper almost
empty
Paper present
[4]
A PFP lower drawer detection sensor Drawer not
installed
Drawer
present
B- --
C PFP lower drawer paper stock sensor Paper almost
empty
Paper present
D PFP lower drawer feed sensor Paper present No paper
E PFP motor rotation status (Motor is rotating at output mode
(03))
Abnormal rota-
tion
Normal rota-
tion
F- --
G PFP lower drawer empty sensor No paper Paper present
H PFP lower drawer tray-up sensor Tray at upper
limit position
Other than
upper limit
position
05/12
To Next Page
Loading...
