© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO350/352/353/450/452/453
ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 41
2
[FAX] button: OFF/ [COPY] button: ON ([FAX] LED: OFF/ [COPY] LED: ON)
*1
• Be sure to install the USB storage device to the equipment and check if the device can be used
with this code.
• Be sure to turn OFF the write protection (the function to prevent data from erasure by the acci-
dental recording or deleting) of the USB storage device before performing the check, otherwise
this code cannot be used.
• It may take some time (2 sec. to 10 sec.) before this check is completed depending on the USB
storage device.
Digital
key
Button Items to check
Contents
Highlighted
display
e.g.
Normal dis-
play
e.g.
[0]
A Dongle (for Printer/Scanner kit (GM-2060)) Connected Connectable Not connect-
able
B Dongle (for Printer kit (GM-1060)) Connected Connectable Not connect-
able
C Dongle (for Scanner kit (GM-4060)) Connected Connectable Not connect-
able
D Dongles for other equipments/Other USB devices Con-
nected
Connectable Not connect-
able
E Judgement for acceptable USB storage device (*1) Acceptable Not acceptable
F- --
G- --
H- --
05/11
To Next Page
Loading...
