© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO350/352/353/450/452/453
ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 43
2
Code Function Procedure
207 LCF end fence reciprocating movement 2
208 LCF end fence motor ON/OFF 3
209 LCF feed clutch ON/OFF 3
210 LCF transport clutch ON/OFF 3
217 Sub-separation fan ON/OFF 3
218 Key copy counter count up 2
222 ADU clutch ON/OFF 3
225 PFP transport clutch ON/OFF 3
226 PFP upper drawer feed clutch ON/OFF 3
228 PFP lower drawer feed clutch ON/OFF 3
232 Bridge unit gate solenoid ON/OFF 3
234 Bypass pickup solenoid ON/OFF 3
235 Discharge LED ON/OFF 3
236 Exhaust fan ON/OFF (low speed) 3
237 Exhaust fan ON/OFF (high speed) 3
238 IH board cooling fan ON/OFF (high speed) 3
241 IH board cooling fan ON/OFF (low speed) 3
242 Upper drawer tray-up motor ON (tray up) 2
243 Lower drawer tray-up motor ON (tray up) 2
248 Developer bias [+DC] ON/OFF 3
249 Developer bias [-DC] ON/OFF 3
252 Main charger ON/OFF 3
253 Separation bias ON/OFF 3
255 Transfer guide bias ON/OFF 3
256 Transfer transformer ON/OFF 3
261 Scan motor ON (Automatically stops at limit position; speed can be changed with the
[ZOOM] button
2
264 SLG board cooling fan 1 ON/OFF 3
265 SLG board cooling fan 2 ON/OFF 3
267 Scanner exposure lamp ON/OFF 3
268 Laser unit cooling fan ON/OFF (high speed) 3
269 Laser unit cooling fan ON/OFF (low speed) 3
271 LCF tray-up motor (up/down) 2
278 PFP upper drawer tray-up motor ON (tray up) 2
280 PFP lower drawer tray-up motor ON (tray up) 2
281 RADF feed motor ON/OFF (normal rotation) : MR-3015
RADF original feed motor ON/OFF (normal rotation) : MR-3018
3
282 RADF feed motor ON/OFF (reverse rotation) : MR-3015
RADF original feed motor ON/OFF (reverse rotation) : MR-3018
3
283 RADF read motor ON/OFF (normal rotation) 3
284 RADF reverse motor ON/OFF (normal rotation) : MR-3015
RADF original exit/reverse motor ON/OFF (normal rotation) : MR-3018
3
285 RADF reverse motor ON/OFF (reverse rotation) : MR-3015
RADF original exit/reverse motor ON/OFF (reverse rotation) : MR-3018
3
08/04
To Next Page
Loading...
